What you need
A project room
The review lives next to the drawings and earlier sessions. Reuse the project’s room if there is one.
A camera that can stream out
Any camera or encoder that can push RTMP, SRT or RTSP to a Server URL and stream key. Guides for Panasonic, PTZOptics and Amcrest are in the Help Center. Video is up to 4K, depending on your bandwidth.
A network connection on site
The camera sends its stream out to Coresee, so the site needs a stable internet connection with enough upload bandwidth. Test it on the real site network before the review.
A host or co-host
Only hosts and co-hosts create feeds and bring them on stage. The Streaming tab is not visible to participants.
Prepare the site review
Before site day.Create the Inbound Feed
Open the room’s Side Panel on the homepage, go to the Streaming tab, choose RTMP, SRT or RTSP in the dropdown and click +. Expand the card to get the Server URL and Channel ID. You can do this days before the walk-through.
Create one feed per camera
A room can have several Inbound Feeds at once, each with its own card and permanent Channel ID; all feeds in the room share one Server URL. Use more than one when the site has more than one camera.
Configure the camera and test it on site
Enter the Server URL and Channel ID on the device (typically a Server URL field and a Stream Key or Channel ID field) and start the stream. Video can be up to 4K, but what you actually get depends on the bandwidth at the site, so set the resolution and bitrate to match the connection.
Put the site documents in Files
Upload the drawings, the checklist and the previous inspection report to the room’s Files tab so reviewers can see them next to the live view.
Invite the reviewers
In the Participants tab, add names and email addresses; each person receives an email with the room link. For collaborators, make them co-hosts.
Run the walk-through
1
Start the session and bring the site on stage
The host opens the room. Once the camera is pushing, the feed appears as a media source, and the host or co-host brings it onto the stage like any other media source.
2
Start the recording
In the Recording tab, choose the recording type and click Rec. Everyone in the room sees a consent notice. Main Room Recording captures the whole session as one file, including presented content.
3
Show the drawing alongside
Present the relevant drawing from Files and use the toolbar to sketch on.
4
Walk the site
The field engineer walks the site while reviewers follow the live view from wherever they are. They talk through what they see, raise issues the moment they spot them, and mark the live view directly, so everyone is looking at the same thing.
Keep the record
The reason to run a site review in a persistent room is the trail it leaves. Here is what is kept, and where to find it.| Record | Where | Notes |
|---|---|---|
| The recording | Recording tab | Listed between sessions. Download it as an MP4, rename it, delete it (permanent) or copy a link. |
| A reviewable copy of the walk-through | Files tab | Upload the downloaded MP4 to Files and present it. Host and co-host can then leave timestamped annotations on it, and the comment count shows on its thumbnail. |
| Who attended and what happened | Room History | Per session: date, duration, participant count, files uploaded and recordings made, plus a timestamped event log. Filter by event type and export the matching events as CSV. |
| Snapshots and marked-up plans | Files tab | Screengrabs saved to the media room folder, including marks drawn over the live view. |
| Documents added during the visit | Files tab | Files uploaded in a session are counted in Room History. |
| Comments on video | Video Details page | Host and co-host can leave timestamped annotations on a video presented in the room. |
Good practice
Before site day
- Test the whole chain on the real site network, days ahead. Check that the feed appears in the room, that audio works, and that the picture holds steady. Feeds and the camera setup can be done from the homepage with no session running.
- Keep one room per project. The Channel ID is permanent for each feed, so a camera configured once can be switched on for every future visit, and every visit lands next to the earlier recordings and drawings.
- Choose a bitrate the connection can hold. A slightly softer picture that stays up is better than a sharp one that drops. Video can be up to 4K, but it depends on the bandwidth at the site.
- Pre-assign roles, and keep the co-host list short. Make the consultant a co-host if they need to present or comment on video. Hosts and co-hosts share delete rights over recordings and session records, so give the role only to people you trust with the record.
During the walk-through
- Split the jobs. Let the field engineer walk and talk while someone in the office runs the room: bringing drawings on stage, watching the chat and taking Screengrabs.
- Say where you are. Have the engineer name the area out loud (“level 3, east stair”). It gives the recording a spoken index, and it helps anyone who dialled in by phone and cannot see the stage.
- Start recording before the walk begins. Everyone sees a consent notice when it starts. You can stop and start again, and each segment becomes its own file.
- Capture each issue as it comes up. Mark the live view, take a Screengrab and save it to the media room folder, so the issue and its image are in Files together.