> ## Documentation Index
> Fetch the complete documentation index at: https://help.coresee.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Large Scale Media Review

> Present a large media file to a big group, or edit over the shoulder with a live stream from your editing software or a camera, without slowing the room down.

A big review puts two heavy loads on every viewer's device: your media and everyone else's video. When dozens of people are on camera while a high-resolution file plays, each device and connection has to handle both at once. The goal is to give everyone the best possible experience, regardless of their bandwidth. To get there, keep the audience muted and off the stage, show only the media, and keep participant video quality at its default.

A few room settings and one layout do most of the work:

> [card] [Boost Mode: Verify it's off](https://help.coresee.com/settings/boost-mode.md)
>
> Off by default. Keeps the load from participant video low. Your media isn't affected.

> [card] Enter Room Hidden: On
>
> Only the people you choose appear on stage.

> [card] Enter Room Muted: On
>
> Nobody disrupts the session as they arrive.

> [card] Presentation Layout: One
>
> Shows only the media, with no tile grid to decode.

> [!NOTE]
>
> **Who can do this?** Room Controls and layout changes are available to the host and co-hosts.

## Example scenario

### Maya's Friday cut review

Imagine Maya, a post-production supervisor who needs 40 stakeholders to review the latest cut of a documentary every Friday.

If she lets everyone join with their cameras and mics on, in the default grid, viewers on slower connections are likely to freeze. Background noise can drown out the dialogue, and the picture can look soft because the room is spreading its bandwidth across many video tiles.

Instead, she changes the room settings before sending the link. She checks that ***Boost Mode*** is off, sets the room so that participants ***enter muted and hidden*** and she switches to the ***One*** presentation layout.

Her editor and producer stay on stage as the only visible faces, while the other 38 people watch the cut full-frame. When the creative director has a note, she raises her hand and Maya brings her on stage. The review runs from start to finish without interruptions.

\
Two ways to review
------------------

The same setup works for both of the most common large-scale review formats.

> [card] Media Presentation
>
> Upload a large media file to the room's Files tab and present it to everyone. This suits screenings and cut reviews.

> [card] Edit over the shoulder
>
> Stream a live feed into the room from an editing application or a camera, and let the audience watch as you work. Plugins are available for Adobe and Avid editing software.

## Set up Room Controls

Open the room's [**Settings Tab**](https://help.coresee.com/settings-tab.md)  in the Side Panel and expand Room Controls. You can do this from the homepage before the session or from inside the room.

<table>
  <colgroup>
    <col width="173" />

    <col width="119" />

    <col width="396" />
  </colgroup>

  <thead>
    <tr>
      <th>Setting</th>
      <th>Value</th>
      <th>What it does for a big review</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>**Boost Mode**</td>
      <td>Verify OFF</td>
      <td>Boost Mode is off by default, so just verify that it is still off. It only affects participant video, so your media is not affected, and leaving it off keeps participant video bandwidth low.</td>
    </tr>

    <tr>
      <td>**Enter Room Muted**</td>
      <td>ON</td>
      <td>Everyone joins with their microphone muted, so late arrivals don't disrupt the presentation.</td>
    </tr>

    <tr>
      <td>**Enter Room Hidden**</td>
      <td>ON</td>
      <td>Participants join without being on stage. Only the people you choose to show, such as the main presenters and collaborators, are visible.</td>
    </tr>
  </tbody>
</table>

> [!NOTE]
>
> **Set these before people arrive.** Enter Room Muted and Enter Room Hidden only apply to people who join *after* you turn them on. People already in the room keep their current mic and camera state.

> [!TIP]
>
> **Tip: configure once, reuse every time** A Coresee room is persistent, so these settings stay with the room. Set up a dedicated review room once and reuse it for every session.

## Control who is on stage

With Enter Room Hidden on, your audience joins as viewers rather than as faces on the stage. You decide who becomes visible, usually the main presenters and collaborators.

### Hide or show a participant

In the [**Participant Tab**](https://help.coresee.com/help/control-panel/participant-tab.md), click the **eye icon** next to a participant's name to hide or unhide them. You can also right-click a participant to open their context menu and hide or show them from there.

### How viewers ask a question

Hidden participants can raise their hand, so your audience never needs to be on stage to ask for the floor.

**1. A viewer clicks the Hand Raise button in their bottom bar.**

**2. You see the raised hand in the Participants tab. Hands are numbered in the order they were raised, so you can take questions fairly.**

**3. Call on the viewer. If they need to appear on stage, show them with the eye icon, then hide them again when they are done.**

> [!NOTE]
>
> **Prefer chat?** Hidden participants can also use the room chat to send comments without taking the stage.

## Choose the layout

Once your media is playing, the room is in its presentation layout. Choose **One**, which shows only the media, so that no participant tiles compete with it for space or bandwidth.

**1. Start presenting your file or start your live feed.**

**2. Open the Appearance tab in the Side Panel.**

**3. Under Presentation Layout, select One.**

> [!NOTE]
>
> **Host layout changes apply to everyone.** When the host changes the layout, every participant sees the change. Leave *Allow Participants to Control Their Own Layout* off if you want everyone on the media-only view.

## Why this works

Every video tile on screen is a stream that each viewer's device has to download and decode. When more than 20 people's video has to be decoded on top of a high-resolution media file, devices and connections start to struggle. Viewers on the weakest connections feel it first, as stuttering playback or dropped frames.

<table>
  <colgroup>
    <col width="223" />

    <col width="304" />

    <col width="263" />
  </colgroup>

  <thead>
    <tr>
      <th />

      <th>\
      Default setup</th>
      <th>Large-review setup</th>
    </tr>
  </thead>

  <tbody>
    <tr>
      <td>**Video streams to decode**</td>
      <td>16+ participant tiles plus media</td>
      <td>Media plus a few presenters</td>
    </tr>

    <tr>
      <td>**Boost Mode**</td>
      <td>Can be turned on to raise participant video quality</td>
      <td>Verified off, for lower bandwidth</td>
    </tr>

    <tr>
      <td>**Audience audio**</td>
      <td>Open mics on arrival</td>
      <td>Muted on arrival</td>
    </tr>

    <tr>
      <td>**Layout**</td>
      <td>Grid with tiles</td>
      <td>One: media only</td>
    </tr>
  </tbody>
</table>

> [!TIP]
>
> Your media gets the room's full attention, and your audience gets a smooth picture on ordinary connections.

## Run the session

### Presenting a large media file

\*\*1. Upload ahead of time. \*\*

Add your file in the [Files Tab](https://help.coresee.com/help/control-panel/files-tab.md) before the session so that it is ready. Check that the format is on the [Supported File Formats](https://help.coresee.com/help/control-panel/supported-file-formats.md) list.

**2. Apply the room settings and open the room yourself first.**

\*\*3. Share the invite so your audience can arrive. \*\*

They join muted and hidden.

\*\*4. Present the file. \*\*

Drag it from the Files tab into the room view and confirm with **Let's Go**, or right-click it and choose **Present**.

**5. Switch to the One layout in Appearance > Presentation Layout.**

\*\*6. Run the review. \*\*

Use the player controls to control playback, and add annotations to mark up specific moments.

### Edit over the shoulder (live stream)

**1. Install the plugin for your editing application: [Adobe Premiere Pro and After Effects](https://help.coresee.com/help/streaming/adobe/adobe-premiere-pro-plugin.md) or [Avid Media Composer](https://help.coresee.com/help/streaming/avid-media-composer-plugin.md). For a camera or an encoder, create an [Inbound Feed](https://help.coresee.com/inbound-feeds.md) instead.**

**2. Apply the room settings**

**3. Connect the plugin to your review room, choose your inputs (Playback or Full Screen) and click Start.**

**4. Switch to the One layout in Appearance > Presentation Layout, so that the audience sees your live feed full-frame.**

\*\*5. Edit. \*\*

Viewers watch your cuts update in real time and raise a hand when they have a comment.

> [!WARNING]
>
> **Streaming from Adobe, Avid or connecting an Inbound Feed requires a Studio license**

\
Frequently asked questions
--------------------------

> [accordion] Will turning Boost Mode off make my media look worse?
>
> No. Boost Mode only affects participant video, so your media is not affected.

> [accordion] Can viewers still see what I present if they're hidden?
>
> Yes. Hidden only means that the viewer isn't on the stage. They keep watching and listening to everything that is presented, but their own video and audio aren't shown to the room.

> [accordion] A viewer needs to speak. What do I do?
>
> Ask them to raise their hand. Hidden participants can raise their hand too, and you'll see it in the Participants tab in the order the hands were raised. When it's their turn, unhide them with the eye icon next to their name, or from their right-click menu.

> [accordion] How do I hide or show someone?
>
> In the Participants tab, click the eye icon next to their name. You can also right-click the participant and use their context menu.

> [accordion] I changed the settings after people joined. Why didn't it apply?
>
> Enter Room Muted and Enter Room Hidden only apply to people who join afterwards. Set them before you send the invite.

> [accordion] Can attendees change their own layout?
>
> Only if you turn on *Allow Participants to Control Their Own Layout*. A participant's own change affects only their screen. Keep the setting off if you want everyone on the media-only view.

> [accordion] Some viewers still see choppy playback. What can they try?
>
> Ask them to close other heavy tabs and applications, and to switch to a wired or stronger Wi-Fi connection if they can. On your side, confirm that Boost Mode is off and that the One layout is active.

> [accordion] Does streaming from Adobe or Avid require a specific license?
>
> Yes. Streaming from Adobe Premiere Pro, After Effects or Avid Media Composer into a room requires a Studio license.

> [accordion] Is a Room the right tool for a very large audience?
>
> Rooms work well for interactive reviews with a few dozen viewers. For broadcasts to thousands of attendees, see [Coresee Events](https://help.coresee.com/help/events/getting-started.md).


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.