> ## Documentation Index
> Fetch the complete documentation index at: https://help.coresee.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Set up a Wirecast Source for an Event

> Send a Wirecast stream to a Coresee Event over RTMP.

This article explains how to send a [Wirecast](https://www.wirecast.io/) stream to a Coresee Event. Wirecast pushes its output to your event over RTMP, using the RTMP URL and Channel ID shown on the event's page, and the stream then appears in the Live Broadcast section of your event preview.

## **Before you begin**

Make sure you have the following ready.

* A Coresee Event, with access to its event page.
* Wirecast open on the computer you'll stream from.
* A network connection with enough sustained upload bandwidth for a 4 Mbps video stream.

## **Setup steps**

Copy the connection details from your event, enter them in Wirecast's output settings, then start the stream.

**1. Copy your RTMP URL and Channel ID**

Go to your event's page. In the left-hand side, under **Event Streams**, copy the **RTMP URL** and the **Channel ID**.

![Coresee Event Configuration Page](https://mintcdn.com/likemindedlabs/dvYAvREev_Hvk1qe/images/coresee-event-configuration-page.png?fit=max\&auto=format\&n=dvYAvREev_Hvk1qe\&q=85\&s=98cde16c414fdc95c17a30015fdb71ad)

**2. Open Wirecast's Output Settings**

In Wirecast, open **Output Settings** and select **RTMP Server** as the destination.

![Output Setting Wirecast](https://mintcdn.com/likemindedlabs/O-cs863paI0V-q_6/images/output-setting-wirecast.png?fit=max\&auto=format\&n=O-cs863paI0V-q_6\&q=85\&s=f683770856ca6558873483bf6fa4365c)

**3. Choose the stream quality**

Set the encoding to **1080p30 (4 Mbps), x264 H.264**.

**4. Enter your Coresee connection details**

Fill in the fields as follows.

| **Wirecast field** | **Enter** |
| :- | :- |
| Address | The **RTMP URL** from step 1, **without the final slash** |
| Stream | The **Channel ID** from step 1 |

> [!WARNING]
>
> \*\*Remove the final slash from the RTMP URL \*\*Wirecast adds the closing slash automatically. For example, if your event shows `rtmp://app.coresee.com:443/live/`, enter `rtmp://app.coresee.com:443/live` in the Address field.

**5. Start the stream**

Start your stream from Wirecast.

![Start Stream Wirecast](https://mintcdn.com/likemindedlabs/O-cs863paI0V-q_6/images/start-stream-wirecast.png?fit=max\&auto=format\&n=O-cs863paI0V-q_6\&q=85\&s=48325e6f0fce38e7dcf31711f7338b69)

> [!TIP]
>
> **Your Wirecast stream appears in the event!** On your event page, go to the **Live Broadcast** section of your preview. Your Wirecast stream will appear there.

![Wirecast Event Preview](https://mintcdn.com/likemindedlabs/O-cs863paI0V-q_6/images/wirecast-event-preview.png?fit=max\&auto=format\&n=O-cs863paI0V-q_6\&q=85\&s=7c9b4c3d577cbc5cca00f1826f04e709)

## **Troubleshooting**

A few things to check if your stream doesn't appear in the Live Broadcast preview.

> [accordion] Nothing appears in Live Broadcast
>
> Confirm the stream is started in Wirecast, and that the Address and Stream values exactly match the RTMP URL and Channel ID under Event Streams on your event page. Make sure the final slash of the RTMP URL has been removed from the Address field.

> [accordion] Stream is choppy or drops
>
> Confirm your network has enough sustained upload bandwidth for the 4 Mbps stream quality selected.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.