> ## Documentation Index
> Fetch the complete documentation index at: https://help.coresee.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Connect a Panasonic Camera

This article walks through connecting a Panasonic PTZ camera to a Coresee room as an **Inbound Feed**, using RTMP. It covers initializing the camera on your network with Panasonic's own setup tool, then pointing the camera's RTMP output at a Coresee Inbound Feed so it appears as a live source inside the room.

**<sub><kbd>Tested on Windows 11</kbd>   <kbd>Protocol: RTMP</kbd>   <kbd>Streaming tab → Inbound Feeds</kbd></sub>**

## **Before you begin**

Make sure you have the following ready before starting.

* A Panasonic PTZ camera, powered on and reachable on the same local network as the computer you'll configure it from.
* A computer on that same network with a web browser (steps below were tested on Google Chrome).
* An active Coresee room with access to the [**Streaming tab**](/streaming-tab) in the Side Panel, and host or co-host permissions to create an Inbound Feed.
* The camera's printed Operating Instructions, for any model-specific detail not covered here — these steps follow Panasonic's own Device Initialization flow closely but are not a substitute for it.

## **Panasonic Device Initialization**

The following instructions were tested on Windows 11. They closely follow the device initialization instructions included in the camera's Operating Instructions.

<Steps>
  <Step title="Power on the camera and connect it to your network">
    Make sure the camera is powered on and on the same subnetwork as the computer you'll use to configure it.
  </Step>

  <Step title="Download and run EasyIPSetupToolPlus">
    Download [EasyIPSetupToolPlus](https://eww.pass.panasonic.co.jp/pro-av/support/content/download/EN/ep2main/easyIPplus_e.htm) from the Panasonic website, install it, and run it.

    * Click **Search**

    <img src="https://mintcdn.com/likemindedlabs/w5nGu1Jo38e3plye/images/panasonic_search.png?fit=max&auto=format&n=w5nGu1Jo38e3plye&q=85&s=efe21aba61f1c7ff873c39b7f9e37473" alt="Panasonic Search" title="Panasonic Search" className="mx-auto" style={{ width:"37%" }} width="876" height="326" data-path="images/panasonic_search.png" />

    If the camera doesn't appear right away, confirm it's powered on and on the same subnetwork as your computer, then search again.

    * Click the camera you want to set up, then click **Network Settings**.

    <img src="https://mintcdn.com/likemindedlabs/w5nGu1Jo38e3plye/images/panasonic_networksetting.png?fit=max&auto=format&n=w5nGu1Jo38e3plye&q=85&s=3f1ef38ca7659b278ca1462976edc78f" alt="Panasonic Networksetting" title="Panasonic Networksetting" className="mx-auto" style={{ width:"48%" }} width="874" height="308" data-path="images/panasonic_networksetting.png" />

    * Enter your network details and click **OK**

    <img src="https://mintcdn.com/likemindedlabs/Ch4hy3d9_JbFsYmC/images/panasonic_networkdetail.png?fit=max&auto=format&n=Ch4hy3d9_JbFsYmC&q=85&s=5740b03bfcb319bf9aa46afb3512465f" alt="Panasonic Networkdetail" title="Panasonic Networkdetail" className="mx-auto" style={{ width:"29%" }} width="622" height="718" data-path="images/panasonic_networkdetail.png" />
  </Step>

  <Step title="Open the camera's Web GUI">
    Back on the EasyIPSetupToolPlus main page, select your camera and click \*\*Web GUI \*\*on the left-hand side. This opens the camera's interface in your default browser, where you should see a live preview of the camera feed.

    <img src="https://mintcdn.com/likemindedlabs/w5nGu1Jo38e3plye/images/panasonic_webgui.png?fit=max&auto=format&n=w5nGu1Jo38e3plye&q=85&s=ca314df2b997bffdfc73a65642f6821d" alt="Panasonic Webgui" title="Panasonic Webgui" width="2785" height="1570" data-path="images/panasonic_webgui.png" />
  </Step>
</Steps>

<Check>
  **Camera initialized** The camera is now initialized and ready to be configured for streaming.
</Check>

## **Coresee RTMP stream setup**

For this section, a Windows 11 computer on the same network as the camera was used, but any device with browser access to the camera's Web GUI should work. These steps configure the camera to push its feed to a Coresee Inbound Feed over RTMP.

<Steps>
  <Step title="As the host or co-host of a room, open the Streaming Tab within the Side Panel">
    <img src="https://mintcdn.com/likemindedlabs/pVEisE1nES9YQq5H/images/streaming_tab.png?fit=max&auto=format&n=pVEisE1nES9YQq5H&q=85&s=30b346e638d486771717f3fdd9e7a3db" alt="Streaming Tab" title="Streaming Tab" className="mx-auto" style={{ width:"59%" }} width="1238" height="1366" data-path="images/streaming_tab.png" />
  </Step>

  <Step title="Under Inbound Feeds, create an RTMP entry">
    You'll see the Server URL and the Channel ID

    <img src="https://mintcdn.com/likemindedlabs/w5nGu1Jo38e3plye/images/streamingtab_inbound_rtmp.png?fit=max&auto=format&n=w5nGu1Jo38e3plye&q=85&s=c3ff700014f63e940f30abd65328e522" alt="Streamingtab Inbound Rtmp" title="Streamingtab Inbound Rtmp" className="mx-auto" style={{ width:"65%" }} width="946" height="626" data-path="images/streamingtab_inbound_rtmp.png" />
  </Step>

  <Step title="Open the camera's Web GUI">
    In your preferred browser (tested on Google Chrome), navigate directly to the camera's address at /live/index.html — for example, [http://10.10.100.79/live/index.html](http://10.10.100.79/live/index.html). You can also reach this through EasyIPSetupToolPlus by selecting your camera and clicking **Web GUI**
  </Step>

  <Step title="Switch the streaming mode to RTMP">
    * In the top panel, go to Setup → Image/Audio → Video over IP → Streaming mode
    * Select RTMP
    * Click Set

          <img src="https://mintcdn.com/likemindedlabs/w5nGu1Jo38e3plye/images/panasonic_webgui_2.png?fit=max&auto=format&n=w5nGu1Jo38e3plye&q=85&s=416de8da43c0730cb112c89d9e484e7c" alt="Panasonic Webgui 2" width="2785" height="1570" data-path="images/panasonic_webgui_2.png" />
  </Step>

  <Step title="Enter the Coresee Inbound Feed details">
    * Still in Video over IP, go to **Server setup**
    * Select URL type Type2
    * Enter the Coresee Inbound Feed's connection details
    * Click Set

          <img src="https://mintcdn.com/likemindedlabs/w5nGu1Jo38e3plye/images/panasonic_webgui_3.png?fit=max&auto=format&n=w5nGu1Jo38e3plye&q=85&s=aba3f35b8d6066aaf13b75af148d4a4d" alt="Panasonic Webgui 3" width="2785" height="1570" data-path="images/panasonic_webgui_3.png" />
  </Step>

  <Step title="Set the streaming format">
    * Still in Video over IP, go to Streaming format
    * Turn RTMP transmission ON
    * Set Max bit rate (per client) to Max 4096 kbps
    * Click Set

          <img src="https://mintcdn.com/likemindedlabs/w5nGu1Jo38e3plye/images/panasonic_webgui_4.png?fit=max&auto=format&n=w5nGu1Jo38e3plye&q=85&s=e441847da0fca97a4381f68f0bca99b8" alt="Panasonic Webgui 4" width="2785" height="1570" data-path="images/panasonic_webgui_4.png" />
  </Step>

  <Step title="Start the stream">
    * In the top panel, go back to **Live** where the camera preview is shown.
    * Click the start button at the bottom right, next to the **SRT/MPEG2-TS/RTMP** option.

          <img src="https://mintcdn.com/likemindedlabs/w5nGu1Jo38e3plye/images/panasonic_webgui_5.png?fit=max&auto=format&n=w5nGu1Jo38e3plye&q=85&s=da364f513be0ee8abc2b05b59dbe3c44" alt="Panasonic Webgui 5" width="2785" height="1570" data-path="images/panasonic_webgui_5.png" />
  </Step>
</Steps>

<Check>
  **Feed is live in the room!** The camera feed is now accessible as an Inbound Feed inside your Coresee room. Once the feed appears in the room's files, a host or co-host can bring it into the stage like any other media source.
</Check>


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.